0.4 hp Motor - Right-Angle
Non-Planetary Geared

Models: 46000, 46001, 46002, 47800, 47801, 47802, 47820, 47821, 47822, 48315, 48316, 48317, 48520, 48521, 48522, 48540, 48541, 48542, 48530, 48531, 48532,
Revised: April 5th, 2013


Use these instructions along with the tool, parts page or manual.

Notice: To avoid damage to the motor housing, use the Special Repair Tools designed for the disassembly and assembly of this motor. Disconnect the tool from the air supply. Use the appropriate wrenches to hold the work spindle stationary and remove the accessory.

Connect Non-Planetary
Geared Motor to
Right-Angle Head:

Step 1

Tighten the 45305 or 45307 Housing Core, or the 50019 Lock Nut onto the 02031 or 02052 Right Angle Housing.
(T to 34 N•m/~300 in. Lbs.)

Notice: Work the left hand thread and right hand thread against each other while holding the throttle lever in the desire position. (T to 34 N•m/~300 in. Lbs.)

▲ Top of Page

Connection of Non-Planetary Geared Motor
to Right-Angle Head Complete